WaveWare Apollo T-2000 Technical Information download pdf (Page 63)

Certification Manual

- 63 -

the comments section. Under Tools / Server / Capcode Prefix,

enter the common 4 digit prefix and click done.

(For more information on capcodes, see Section V. Paging)

- If paging groups are required, click on PAGING GROUPS.

(Tools / Staff / Paging Groups) Click ADD GROUP and then

add the members at the bottom. Click SAVE when each group

is complete, and click DONE when finished. Remember that

multiple pagers can be selected by using the CTRL and/or

SHIFT keys. NOTE, never name a group the same as a

pager.

- Call escalation is the next step in paging programming. (Tools /

Staff / Call Escalation) This screen is where the installer

configures the order in which the pagers will receive a page

when a call is placed. Click NEW and then label the escalations

you will need. Place the appropriate recipients using the drop

down tabs for each level. Notice that the drop down lists are

populated by the paging groups and pagers that were just

programmed. After each line is completed hit SAVE. Click

DONE when finished.

- After the Call Escalation Templates have been completed, the Zone

Handling must be configured. (Tools / Staff / Zone Handling

Configuration) The zone configuration screen is where the

installer chooses what call escalation template is used for a

particular zone each shift. Click NEW and type in the Handler

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 113 114

No comments

WaveWare Apollo T-2000 Technical Information Page 63