WaveWare Apollo T-2000 Technical Information download pdf (Page 43)

Certification Manual

- 43 -

Programming the Concord Panel

When the Concord Panel comes out of the box, there are several

settings and setup things that need to be properly set in order for the panel

to work correctly with the AllCall© Wireless Nurse Call System.

Installation

 Install battery leads

 Install standoffs for modules

 Connect Buss devices 3,4,5,6 etc.

 Connect battery

 Connect AC Power (LED’s should turn on, and touchpad should

illuminate)

Programming

 Enter Programming = 8 + 4321 + 0 + 0 press * until “System

Programming” shows, then A or B to exit and # to select.

 Clear Memory

o Program Mode = 8 + 4321 + 0 + 0

o Hit (A or B) until “Clear Memory” shows, hit # 4321#

o Should show “Scanning bus devices” and restart.

 Phones Menu – No Changes

 Timers Menu

o Supervisory time – Change to 630

o RFTX – Change to 12 hours

o Sleep time – turn off – Press D

 Reporting Menu

o 24 hr tamper – must turn off

o AC failure – must turn on

o Receiver failure – must turn on

o RF Low battery – change to daily

o RF Supervisory – change to daily

 Siren Options

o Immediate beeps – must turn on

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 113 114

No comments

WaveWare Apollo T-2000 Technical Information Page 43